A polycarbonate greenhouse on a wooden frame, made by hand, is a fairly light structure, which implies moving to another place during operation. Therefore, the foundation should also imply simplifi excavation and transfer. Small concrete blocks are suitable for this – 20 × 20 × 40 cm or a lawn block – a curb 500 × 70 × 211 mm. Depending on the size of the greenhouse, a trench 60 cm deep is dug, the bottom is fill truemoney data sand. Blocks are plac in the corners and in the middle of all sides. A wooden beam is laid on them – 150 x 150, impregnat with an antiseptic. The free space between the structure and the ground is fill with sand. Roofing material is spread on top. An existing or newly built greenhouse can be install on such a base.
Types of designs and drawings
The wooden frame and polycarbonate give free rein to how inbound marketing can drive your business toward success imagination, allowing the construction of greenhouses of any configuration:
- arch;
- dome-shap
- single-pitch
- pyramidal
- gable
A drawing will help you make a greenhouse with the necessary functionality and dimensions. A well-execut plan includes a calculation of the amount of materials, determines the philippines numbers order, and the dimensions of the structural elements. Displaying it on paper simplifies the choice of the shape of the structure being erect, making it visual. Additional information about a particular configuration helps you make the right decision.
Dome-shap
The main purpose of protective soil structures is to maximize the yield of vegetable crops.
The complexity of constructing a dom wooden greenhouse, the consumption of materials and the resulting minimum usable area make it clear that the structure does not meet its intend purpose.
Inside the greenhouse, you have to mix bs of irregular configuration. Installing trellises becomes a pointless exercise. There is no ne to talk about the convenience of work. Dome-shap greenhouses have one advantage – they are a decoration of landscape design.
Single-pitch
Garden plots of small area are better suit to single-slope structures of clos ground. Structures of this type are install as an extension to houses, utility blocks, capital fences. The greenhouse is locat on the southern side of the standing object. The length of the single-slope structure corresponds to the size of the wall. The height and width depend on the number of bs of cultivat crops. The angle of the slope is bas on the climate. The disadvantage of wall greenhouses, especially with a south-north orientation, is poor illumination.
Photo: collage © Vosaduli.ru
Pyramidal
The fascination with the mysteries of the East has l to the appearance of pyramid-shap greenhouses in garden plots. The construction of this unusual structure is carri out in compliance with special requirements. The base is a square with equilateral ges of a strictly defin length. The ribs of the frame must converge at the top – always above the center of the base. The frame is install, strictly taking into Portable greenhouse on foundation blocks the directions of the cardinal points. The entrance is on the north side. An error in proportions (calculations require taking into account the ratio of the base – 1.57, and the ribs – 1.49 to the height) deprive the pyramid of miraculous properties. Claims that the pyramidal structure promotes the recovery of plants and an increase in yield have no scientific evidence. But even if this were so, the structure itself is not suitable for obtaining a large harvest.
Gable roofs
The simple design allows for construction from easily process materials – timber. The durable structure reliably resists wind and snow loads. The area of clos soil is us to the maximum. Convenient care of crops – the ability to increase the doorway facilitates labor. The height of the structure allows you to work without bending. The height of the gable greenhouse promotes uniform heating, free ventilation, which makes it possible to grow any vegetable crops and even combine plantings.